PlatformsArtoo has a extensible system for connecting to hardware devices. The ARDrone from Parrot is an inexpensive quadcopter that is controlled using WiFi. It includes a built-in front-facing HD video camera, as well as a second lower resolution bottom facing video camera. + info about the ARDrone platform click here Install the Artoo module providing ARDrone support through RubyGems: This small program lets the ARDrone takeoff, hover, and land. The ARDrone is a WiFi device, so there is no additional work to establish a connection to a single drone. However, in order to connect to multiple drones, you need to perform some configuration steps on each drone via SSH. Automatic Reset From Emergency Mode When you first connect to the ARDrone by calling the start method, if it is in "emergency" mode, the ARDrone will not take off. Artoo can automatically reset it back "normal" mode, to be able to fly IF you pass in the navigation like this example:

Available drivers for the ARDrone platform are listed below. There are three drivers for the ARDrone: the ARDrone for flight control, the ARDroneNav for navigation data, and the ARDroneVideo for grabbing video data. New (10) from $181.86DRONE 2.0 Flight Recorder: GPS, 4GB, return to take-off location feature Using the Parrot Flight Recorder, the AR.Drone 2.0 is the first toy with on-board GPS. This new accessory improves the features of the AR.Drone 2.0 and records more than 350 flight settings. It is the black box of your AR.Drone 2.0 Flight Recorder Geolocation using the GPS module Select your destination on the map Record flights and videos using 4GB Flash memories Review your flights modeled in 3D on the AR.Drone Academy Map Make the AR.Drone 2.0 automatically return to its take-off point Improves stability in flight Control Mode: “Click & Go” Select the destination on the map Set the altitude and cruise speed Click “GO” The AR.Drone starts its flight (operates within the limit of the Wi-Fi connection with the control device) Return Home This new function makes the AR.

Drone return automatically to its take-off point The GPS coordinates are recorded at each moment which enables the AR.Drone 2.0 to position itself accurately in space (+/- 2m) The signal captured from the satellites can vary the location Better Flight Behavior Using Flight Recorder GPS sensors, the AR.Drone 2.0 is more stable when flying in altitude Arrival at the destination view larger Connecting Connect the Flight Recorder to the USB port of the AR.parrot ar drone price in philippinesEnsure the Flight Recorder is positioned exactly above the battery to obtain best results. parrot ar drone 2nd generationThe official video shows you how to do this. parrot ar drone san diegoDrone Academy Replay View your flights from another angle using the AR.ar drone parrot kaufen

Drone Academy replay function. Improve your trajectories using the 3D modeling of each of your flights. Retrace your flights in 3D view larger Create your Flight Plans in Advance The Flight Recorder is compatible with the MAVLink Open Source communications protocol, which means it can be used with the QGround Control software package. QGround Control is a free software package available in Open Source under Windows, Linux and Mac OS X. storm drone 4 prezzoIt allows you to create your own flight plans with multiple intermediate points in 3 dimensions. ar drone 2 flugdauerDrone will follow this aerial route automatically. In addition, a team at the Delft University of Technology integrated the open source high end autopilot software, paparazzi, in the AR.Next step is to have a laptop with paparazzi on it, to connect the laptop wifi to the AR.

Drone, to launch paparazzi and to click on "compile" so that the software will be put on the AR.view larger Technical Specifications Dimensions: 77.7 x 38.3 x 12.5mm Weight: 31g Accuracy: +/- 2 meters Frequency: 5Hx Voltage: 3.3V TBC Time To First Fix: 25s maximum 4GB Flash memory (allows 2 hours of video to be recorded) USB Port: Comprises one type A female USB port to connect a USB key drive WARNING: This GPS receiver can only be used with the AR.Do not connect other GPS devices. The pilot must always maintain direct visual contact with their AR.HD Battery Specifications Lithium battery energy content, in watt hours = 16.5 Wh Total battery Weight = 120g including plastic casing and protection circuit Lithium battery voltage = 11.1V Number of Lithium ION cells: 3 Battery life in hours: 18 minutes (0,3 hour) 4 x 1 x 6 inches 3.6 out of 5 stars #5,696 in Cell Phones & Accessories (See Top 100 in Cell Phones & Accessories) 5 star42%4 star14%3 star8%2 star15%1 star21%See all verified purchase reviewsTop Customer ReviewsCool Concept, But For Now That's About All....|

Limited Functionality, but does what it claims, nothing more. Forget QgroundCotrol, GPS still = poop.|It kind of works.|I wound up returning it.| See and discover other items: drone return home, drone with return home feature, camera gps Follow the steps below to connect with your mobile device: Turn your mobile device’s Wi-Fi OFF, then ON. Turn your drone OFF, then ON. Look for the drone’s designation in the Wi-Fi setting of the mobile device. *Note: Eliminate all potential sources of Wi-Fi interference by powering down all non-essential devices with wireless capabilities. Follow the above steps to connect Jumping Race drone to your smart device via Wi-Fi. Open FreeFlight Jumping, go to    > Check for updates. Follow the on-screen direction to download updates. 1. Insert a battery into the Jumping Race drone and wait until the lights (eyes) turn green. 2. Connect the drone to your computer using a USB/micro-USB cable (provided).

4. Under DOWNLOADS, click Software update to download the update file. DO NOT RENAME THE FILE. 5. Drag and drop the update file into Jumping Race as though it were a USB Flash drive. The update file must be placed at the root of the drone and not in a folder. > The lights flash orange while the update file is being transferred. > Once the transfer is complete, the lights turn green. 6. Safely disconnect and remove the drone from your computer.The lights alternately flash orange with increasing rapidity. Do not remove the battery while the update installation is in progress. 7. When the lights turn green, the installation is completed. If you are unable to complete the update using either Wi-Fi or USB, you may need to reset the drone to reinitialize the software. Insert a fully charged battery and wait for the lights to turn green. Press and hold the power button down for 10 seconds (minimum) to reset the drone. This will clear all current settings and stored media on the drone.

Repeat the steps in Updating software once the drone completes booting. My drone won’t jump First, make sure there is enough battery power (at least 50%).  Jumping Race drone cannot perform a jump with a low battery or if the device has been picked up (off the ground) recently. If the drone is making clicking/popping sounds while charging up for a jump, that could mean the jump mechanism is damaged or broken, which could have resulted from long drops or falling on hard surfaces. You can either choose to do the repair yourself, or contact customer support for part/product replacement under warranty (within one-year of purchase). Piloting screen is black A black piloting screen is most likely the cause of outdated drone software. To check the current version of your drone, do the following: Power on your drone, wait for the LED “eyes” to turn green. In FreeFlight Jumping, go to    > Settings, swipe the screen to access the INFORMATION page to see software versions.

Follow the above Updating software section to update the drone if necessary. If the problem persists after updating both FreeFlight Jumping and Jumping Race drone, follow the steps in Update failed to reset the drone. Cannot capture, review, or transfer media from my drone First, make sure the drone’s internal memory is not full, if it is, you cannot take additional photos and/or videos until more spaces are freed by deleting or transfer files off storage. To access Jumping Race drone’s internal memory, do the following: Power on the drone, wait for the LED “eyes” to turn green. In FreeFlight Jumping, tap    > Internal Memory. A list of photos and videos opens. Tap on the file(s) you want to transfer/delete, then tap TRANSFER or DELETE at the bottom of the page. At the prompt, tap OK to transfer, or tap CANCEL to go back to the previous page. If you are still unable to capture or record images with the camera, follow the steps in Update failed to do a hard rest of the drone.