Settings allows you to fine-tune Parrot Mambo's altitude, inclination, vertical speed, and rotational speed, in addition to make changes to control modes and camera adjustments. 1.   Open the FreeFlight Mini app and tap START to open the joystick screen. 2.   At the joystick screen, tap Settings  to open PILOTING SETTINGS. There are two categories in PILOTING SETTINGS:  Piloting and Position. This is the default control mode, where you use the phone to fly the drone. This mode is more suitable for the novice pilot. You can test your piloting skills by adjusting Parrot Mambo's altitude, climb speed, and the pitch angle to make your flying more challenging. However, it is a good idea in the beginning to dial these down until you become more familiar with the responsiveness of the drone. Normal relies on the control device orientation for movement: tilt your smartphone left to make the drone turn left, tilt your smartphone right to make the drone turn right, etc.

*Note: Hull and Cut out are also available in both ACE and  NORMAL modes. Scroll down to access the camera setting. Select this option to take photos with your smartphone's camera. By default Parrot Mambo is set to take photos with its own camera (hence not highlighted). Select this option if you plan on flying Parrot Mambo with propeller guards. This option stops the motors if the propellers hit an obstruction. This option is activated automatically (and cannot be turned off) when you fly with no hull protection. If you fly with hulls mounted, you can choose to whether activate or deactivate the Cutout option. Tap  FLAT TRIM before take-off or after a crash to ensure flight stability. Limits how high the drone can fly. Sets the pitch angle of the drone in forward flight; the greater the pitch angle, the faster the drone flies. Limits how fast the drone can ascend and descend. Limits how fast the drone can turn on its own axis.Drone 2.0: the second version of the popular quadrocopters

What should I do if I cannot secure a WiFi connection with my iPhone and AR drone? Touch ‘Settings’ in your phone We recommend to be in ‘Airplane Mode’ to decrease the chance of interference Select the WiFi name ardrone_parrot Wait until the network name is check markedar drone 2 pinion gear My A.R Drone does not fly straight. ar drone 2 power edition купитьHow can I fix this?parrot ar drone max wind You may have selected Flat Trim but the A.R Drone is not on a flat surface: start the A.R FreeFlight application and press the setting key. where to buy parrot ar drone in the philippines

Make sure that the A.R Drone is settled on a flat surface before pressing Flat Trim. In the A.R Drone’s setting, check that the Trim Select option has been set to Auto What does it mean when the LEDs 1 2 and 3 blink? These LEDs correspond to the battery cells. They blink when the corresponding cells are balancing. parrot ar drone bearing upgradeThis blinking does not indicate a progression of the battery charging progress.parrot ar drone emergency What is the ‘Emergency’ key used for? The emergency key cuts out the AR.Drone will fall from whatever height it is currently at. You should therefore only press this key in a genuine emergency. In most scenarios, simply landing the AR.Drone is enough to resolve any problems. You can also take your finger off the iPhone: the AR.Drone will automatically stabilize.

Should I always do a flat trim/calibrate? Before every flight, crash or not, always calibrate the AR Drone 2.0. After connecting the battery place the AR Drone 2.0 on as level of a surface you can find. On your flight app find and click “Calibrate” before taking off. Then take off and allow the AR Drone 2.0 to hover, once a nice hover has started click the “calibrate” button again and allow the AR Drone 2.0 to spin 360 degrees. Should I reset after crash? Normally it is not necessary to push the reset button after a crash, just calibrate the AR Drone 2.0 as told in above. But if the AR Drone 2.0 still has issues, the reset button can be found under the battery through a small hole in the battery tray. The button is a fair distance down inside, but with steady hands you will be able to push it with the “in-field drone reset tool”. One or more motors won’t spin, what should I do? This is a fairly rare phenomenon but it can happen in a flight just after a crash.

You have to be fast on this because without all the motors spinning on launch, the AR Drone will only make it about a foot or two into the air and do a nasty backflip (hopefully not into something). If pressing the reset button doesn’t solve this one, first check the motor gears for any broken or grit / dirt binding them up. Also check that there doesn’t seem to be any wobble in the prop shaft by unplugging the battery and spinning the propellers a few times by hand (see tip 5 if you have a bent shaft). Follow the instructions in tip 2 above and hopefully that should put you back into the air. After trying all this and the motor still does not turn, you might have blown the motor, ESC, or the motherboard. All motors are spinning, but the AR. See troubleshoot 1 and 2; also check the motor gears for any broken or grit/dirt binding them up. Then check that there doesn’t seem to be any wobble in the prop shaft by unplugging the battery and spinning the propellers a few times by hand